|
|
 |
 |
 |
|
|
|
|
 |
|
The OmniCureŪ LX400 UV LED Spot Curing System utilizes the highest power and most reliable LED technology in one of the smallest form factor currently available for UV adhesive curing. The OmniCureŪ LX400 controller can operate four UV LED Heads independently or simultaneously, each of a different wavelength (UV LED Heads available in 365nm, 385nm and 400nm). This is unique to the OmniCureŪ LX400 controller, setting it apart from other UV LED bonding systems available today. This enables it to accommodate more applications.
- 9,500mW/cmē Maximum Irradiance (with the 385nm UV LED Head)
- UV LED Heads are available in 3 different wavelengths, 365nm, 385nm and 405nm
- Controls up to Four UV LED Heads Simultaneously with a single connection or independently
- Each Head Can be Set for Different Exposure Times and Irradiance Levels in 1% Increments
- Reliable and Easy-to-Use Design
- Small Footprint
- Energy Efficient and Environmentally Friendly
- Adherence to Category Safety Standards
Benefits
- Gives highest power that UV LED technology offers for high speed adhesive curing applications or for curing larger spots applications.
- Will accommodate more of today's current adhesives to maximize selection or minimize changes to your existing process.
- System is easily configured to simultaneously cure four of the same or four unique applications for greater production efficiency.
- Precisely set the UV Light exposure Required for the UV Curing Application.
- Front panel controls do not require extensive operator training or system downtime.
- Easily used as a standalone solution or embedded into automated manufacturing lines and equipment. Extra cooling of the unit or environment is not required.
- Consumes 80% less power when compared to a UV arc lamp spot curing system (less than 80VA when operating four LED heads at full power).
- RoHS compliant and meets CE requirements.
|
|
| |
